Your Technology Solutions Provider Leading the Way™
Celebrating 10 Years in 2010
Celebrating 10 Years in 2010
AdvancedMC Products
RedLinX™ offers a variety of AdvancedMC (PICMG AMC.0) modules.
| SY AMC/104 | MicroTCA™ Starter Kit With 4 AMC Slots |
| AM 210/x0x | AMC Intel Core™ 2 Duo Module |
| AM 110/x0x | AMC Intel Core™ 2 Duo Module |
| AM 100/20x | AMC Intel Dual Core Xeon Module |
| AM 400/x01 | AMC Graphics Module with Mass Storage Option |
| AM 600/20x | AMC SATA Dual Disk Storage Module |
| AM 600/10x | AMC SATA Single-Width Disk Storage Module |
| B2-AMC | AMC Hybrid Signal Processing Card |
| SP/S4-AMC | AMC Altera® Stratix® IV GX with four SFP/SFP+ |
| S4-AMC | AMC Altera® Stratix® IV GX Reconfigurable |
| SF/GX-AMC | AMC Altera® Stratix® II GX with four SFP/SFP+ |
| GX-AMC | AMC Altera® Stratix® II GX |
| AMBO | AMC I/O Breakout Board |
This is an illustative sample of the products we have available. Feel free to contact us at sales@redlinx·co·za for information on more options to meet your requirements.
SY AMC/104: MicroTCA™ Starter Kit With 4 AMC Slots
- Supports single-width AMC modules
- Supports PICMG® MicroTCA.0 1.0 and PICMG AMC.0
- MicroTCA Backplane provides 5 vertically mounted card slots: 4 x AMC single-width full-height (5 HP) slots and 1 x MicroTCA Carrier Hub (MCH) (5 HP) slot
- Pre-installed system boards:
- 1 x AM 110/102 2.16 GHz Intel® Core™ 2 Duo AMC SBC
- 1 x AM 400/101 SATA hard disk drive and graphics AMC
- 1 x MT MCH/001 MicroTCA Carrier Hub
- Available slots for AMC development: 2 x single-width full-height slots
- Integrated Power Supply: +12V output; +3.3V system management output; rated power 250 Watt; AC 90-264V, 47Hz to 63Hz input
- IPMI V1.5 and hot-swap (AMC.0)
- Operating temperature: +5°C to +40°C
- Support for Linux®, Windows® XP, Windows® XP Embedded, Windows® Server 2003 and QNX®
AM 210/x0x: AMC Intel Core™ 2 Duo Module
- 2.26 GHz Intel® Core™ 2 Duo processor SP9300 or 1.86 GHz Intel® Core™ 2 Duo processor SL9400
- Up to 8 Gbytes DDR3-1066 SDRAM via two SODIMM sockets
- PCI-Express single x8 or dual x4 (AMC.1 Type 8) with transfer rate up to 4 Gbytes/s
- 2 x Gigabit Ethernet (AMC.2 Type E2)
- 4 x SATA300 (AMC.3 Type S2)
- 5 x USB 2.0; 2 x Serial ports
- IPMI V1.5 and hot-swap (AMC.0)
- Operating temperatures:
- 0°C to +55°C (N-Series, all configurations)
- -25°C to +70°C (E-Series, 1.86 GHz full-height front panel & 2.26 GHz full-height front panel)
- Support for Linux®, Windows® Server 2003, Windows® Server 2008, Windows® XP, Windows® XP Embedded, QNX® and VxWorks®
AM 110/x0x: AMC Intel Core™ 2 Duo Module
- 2.16 GHz Intel® Core™ 2 Duo processor T7400 or 1.5 GHz Intel® Core™ 2 Duo processor L74000
- Up to 8 Gbytes DDR2-400 ECC SDRAM via two registered SODIMM sockets (full-height module) or 4 Gbytes via soldered registered memory module (mid-height module)
- PCI-Express single x8 or dual x4 (AMC.1 Type 8) with transfer rate up to 4 Gbytes/s
- 2 x Gigabit Ethernet (AMC.2 Type E2)
- 4 x SATA150 (AMC.3 Type S2)
- 4 x USB 2.0; 2 x Serial ports
- IPMI V1.5 and hot-swap (AMC.0)
- Operating temperatures:
- 0°C to +55°C (N-Series, all configurations)
- -25°C to +70°C (E-Series, 1.5 Ghz, full-height panel)
- Support for Linux®, Windows® Server 2003, Windows® XP, Windows® XP Embedded, Windows® 2000 and QNX®
AM 100/20x: AMC Intel Dual Core Xeon Module
- 2.0 GHz GHz Dual-Core Intel® Xeon® LV processor or 1.66 GHz Dual-Core Intel® Xeon® ULV processor
- Up to 16 Gbytes DDR2-400 ECC SDRAM soldered on-board
- PCI-Express x8 (AMC.1 Type 8)
- 2 x Gigabit Ethernet (AMC.2 Type E2)
- 4 x SATA150 (AMC.3 Type S2)
- 4 x USB 2.0; 2x Serial ports
- IPMI and hot-swap (AMC.0)
- Operating temperatures: 0°C to +55°C
- Support for Linux®, Windows® 2000, Windows® Server 2003, Windows® XP, Windows® XP Embedded and QNX®
AM 400/x01: AMC Graphics Module with Mass Storage Option
- Utilizes Silicon Motion™ SM722 3D/2D dual display controller
- Resolution up to 1280 x 1024 pixels, 24-bit color @ 85Hz refresh rate
- CRT RGB interface via DVI-I connector
- Active matrix (TFT) and passive (DSTN) PanelLink® flat panel interface via DVI-I connector
- Optional on-board SATA hard disk drive (AMC.3 Type S2)
- PCI-Express x8 (AMC.1 Type 8)
- IPMI and hot-swap (AMC.0)
- Operating temperatures:
- +5°C to +40°C (N-Series, with HDD fitted)
- 0°C to +55°C (N-Series, without HDD)
- -25°C to +70°C (E-Series, without HDD)
- Support for Windows® 2000, Windows® XP, Windows® XP Embedded, Linux® and QNX®
AM 600/20x: AMC SATA Dual Disk Storage Module
- Up to 2 x SATA disks (AMC.3) or up to 2 x CompactFlash™ / Hitachi GST Microdrives™
- Compatible with RAID 0 and RAID 1 systems (complex Raid systems can be supported with multiple boards)
- IPMI and hot-swap (AMC.0)
- Designed to interface to AM 110/10x (Intel® Core™ 2 Duo) and AM 100/20x (Dual-Core Intel® Xeon®)
- Operating temperatures (hard drive version): +5°C to +40°C (specifications dependent on hard disk drive)
- Operating temperatures (CompactFlash™ version):
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
AM 600/10x: AMC SATA Single-Width Disk Storage Module
- Up to 1 x SATA disks (AMC.3) or up to 2 x CompactFlash™ / Hitachi GST Microdrives™
- Compatible with RAID 0 and RAID 1 systems (higher Raid number systems can be supported with multiple boards)
- IPMI and hot-swap (AMC.0)
- Designed to interface to AM 110/10x (Intel® Core™ 2 Duo) and AM 100/20x (Dual-Core Intel® Xeon®)
- Operating temperatures (hard drive version): +5°C to +55°C (specifications dependent on hard disk drive)
- Operating temperatures (CompactFlash™ version):
- 0°C to +55°C (N-Series)
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
B2-AMC: AMC Hybrid Signal Processing Card
- High density Altera Stratix® II FPGA
- Four Analog Devices ADSP-TS201 DSPs
- BittWare’s FINe™ Host/Control Bridge provides control plane processing and interface
- Over 2 GBytes on-board memory
- I/O includes: general-purpose DIO, RS-232, fibre transceiver, LVDS, 10/100/1000 Ethernet, PCIe, SerDes
SP/S4-AMC: AMC Altera® Stratix® IV GX with four SFP/SFP+
- High density Altera Stratix IV GX supported by BittWare’s ATLANTiS FrameWork for FPGAs
- 4 SFP/SFP+ transceivers on front panel
- BittWare’s FINe™ III Host/Control Bridge for control plane processing and host interface
- Up to 2 GBytes on-board memory
- I/O includes 10/100/1000 Ethernet, SerDes, LVDS, RS-232, and JTAG
S4-AMC: AMC Altera® Stratix® IV GX Reconfigurable
- High density Altera Stratix IV GX supported by BittWare’s ATLANTiS™ FrameWork
- BittWare’s FINe™ III Host/Control Bridge provides control plane processing and interface
- VITA 57 FMC site for I/O and processing expansion
- Over 2 GBytes on-board memory
- I/O includes 10/100/1000 Ethernet, SerDes, LVDS, RS-232, and JTAG
SF/GX-AMC: AMC Altera® Stratix® II GX with four SFP/SFP+
- High density Altera Stratix II GX supported by BittWare’s ATLANTiS™ FrameWork for FPGAs
- 4 SFP/SFP+ transceivers on front panel
- BittWare’s FINe™ II Host/Control Bridge provides control plane processing and interface
- Over 2 GBytes on-board memory
GX-AMC: AMC Altera® Stratix® II GX
- High density Altera Stratix II GX supported by BittWare’s ATLANTiS™ FrameWork for FPGAs
- BittWare’s FINe™ II Host/Control Bridge provides control plane processing and interface
- Front Panel Mezzanine site for I/O and processing expansion
- Over 2 GBytes on-board memory
- I/O includes: 10/100/1000 Ethernet, RS-232, SerDes, LVDS, JTAG
AMBO: AMC I/O Breakout Board
- Ethernet access to AMC port 0
- Access to AMC ports 1-20 and AMC clocks via Infiniband-type headers
- IPMI access via standard header
- On-board 100 MHz fabric clock
- ATX power connector for system power supply
